A manufacturer has "accelerated" its "net zero journey" after boosting its technology capacity to cut its energy use.

BEP Surface Technologies, a leading electroplating and surface finishing specialist based in Radcliffe, has cut energy use by 20 per cent after investing in control and automation technologies.

The bespoke solution has transformed the Eton Hill Road-based manufacturer’s chrome plating process by "enabling real-time visibility of critical operational parameters, enabling enhanced monitoring and data analysis".

As well as energy use, the two-year project, backed by skills support from Made Smarter, has cut material use by 10 per cent and labour use by 15 per cent.

The scalable solution integrates with BEP’s grinding machinery to introduce predictive maintenance strategies and monitor hazardous materials to enhance safety. It is now being rolled out to copper and nickel-plating operations.

The digitalisation programme has also "facilitated a cultural shift" within the 54-year-old company.

Reducing manual operation and monitoring is "empowering engineers to drive continuous improvement initiatives".

Managing director Andrew McClusky said: “The successful implementation of our control and automation system has revolutionised our chrome plating process, fast-tracked our digital transformation and accelerated our net zero journey.

“Like many heritage industries, electroplating and surface engineering has previously relied on operator skills and experience.

"Capturing that vital data from our processes enables ground-breaking control and automation, allowing our engineers to monitor and analyse comprehensive data sets and providing invaluable insights into process optimisation and energy efficiency.

“This project epitomises BEP’s commitment to innovation and excellence in manufacturing practices that have underpinned our work over the last half-century.”

Bury Times: BEP Surface Technologies managing director Andrew McCluskyBEP Surface Technologies managing director Andrew McClusky (Image: Supplied)

The chrome plating project was launched in 2022 as part of BEP's digital strategy.

It was supported by Made Smarter, a government-backed programme helping SMEs adopt technology and skills, which funded a six-month digital internship to work with BEP.

Hassan Bin Mazhar, then an MSc student in aerospace engineering at the University of Salford, was tasked with addressing the challenge of excessive chrome deposition during the plating process.

The project's first phase applied sensors to the plating tanks to enable real-time acquisition of operational data such as temperature, volts, amps, solution levels, solution composition, timings, and extraction efficiencies at each boiler.

This was collated and displayed in real-time via Human-Machine Interfaces to engineers who can precisely monitor and control parameters.

A supervisory control and data acquisition software system was then deployed to centralise those readings and analyse them to offer new insights and enable engineers to optimise the process.

Such was the project's success that BEP took on Hassan as an automation engineer, who spent the last 18 months developing and scaling the solution.

Bury Times: Automation engineer Hassan Bin MazharAutomation engineer Hassan Bin Mazhar (Image: Supplied)

Hassan said: "This project has been a dream start to my career. I gained hands-on experience in control and automation and was able to make a real-life impact on a challenge that had been niggling BEP for a long time.

"For BEP, it demonstrated what could be achieved through a small investment in technology and bringing in some new digital skills.

"It has also proved that kick-starting the digital transformation journey need not be elaborate or expensive."

The transformative shift has enabled BEP to move towards a model that "prioritises technical expertise over manual operation, upskilling the roles within the business and paving the way for growing the engineering workforce".

BEP provides a range of chrome, nickel and copper plating services and surface finishing, dealing with turbines and large rotors for the energy sector through to small shafts and all types of rotating equipment.